Brow Code

• Vegan Friendly Formula! We use a Vegan friendly Keratin solution to ensure we adhere to strict Vegan guidelines
• Services per Lustre Kit: approx 15-18 
• We recommend purchasing Brow Gold along with this Lamination kit in order to provide the full recommended experience for customers, as well as the recommended after-care retail product.

WHAT IS INCLUDED:

1. Brow Code’s Lustre Brow Adhesive  (a water-soluble brow adhesive used to fix the hairs in place prior to Lustre Brow Lamination).

2. Lustre Lamination Kit 

3. Brow Wrap

BROW CODE LUSTRE LAMINATION STEPS:

Read all Instructions & Important Information below before starting treatment.

Prior to Step 1 in our Lustre Lamination Kit, apply Brow Code’s Lustre Brow Adhesive evenly throughout the brow in a thin layer. Use a disposable spoolie brush to comb and fix the hairs in place in an upward direction. Ensure you are setting the brow in the exact direction you wish to laminate the hairs in. Once dry, you can apply Step 1 on top of this and continue all directions as seen on The Lustre Kit.

Apply the Brow Adhesive as per above steps and follow below:

1. Apply Brow Code Lustre Step 1 - Brow Perming Solution to one brow at a time. Take care to keep solution to the hair area only. Cover brows with cling wrap to ensure the hairs are fixed in an upright position. Leave for 5-8 minutes but no longer than 9 minutes.

2. Remove the cling wrap and remove Step 1 with a dry cotton tip. If any excess product remains, use a damp cotton tip to remove from the tips of the hairs. Apply Step 2 - Brow Fixing Solution to both brows. Cover again using your cling wrap to fix the hairs into place. Leave on for 5-8 minutes but no longer than 9 minutes.

3. Remove the cling wrap and remove Step 2 with a dry cotton tip. If any excess product remains, use a damp cotton tip to remove from the tips of the hairs. Apply Brow Code tint (or colour deposit) using the Brow Code 122 brush for application of colour.
​
4. After completing the tinting service, apply Step 3 - Brow Keratin Nourish to both brows. Use a generous amount to ensure this is applied to the hair and the skin. Instruct the client to remove after 2 hours with a dry cotton tip or pad.
​
5. Retail the Brow Gold Oil to your client and instruction them to nourish their skin and hair daily. 
 

Step 1: 5-8 minutes. No longer than 9 minutes.
Step 2: 5-8 minutes.
Step 3: Client to remove after 2 hours and apply Brow Gold.


HAIR TYPE GUIDE:
Thin or Fine Brow Hairs: 4 - 5  Minutes 
Medium or Normal Brow Hairs: 5 - 7  Minutes
Coarse of Stubborn Hairs: 7 - 10  Minutes

IMPORTANT:

• Tint and other colour deposit techniques develop much faster after lamination due to porous hair. We therefore advise to reduce your timings and watch the development of the colour closely.
• Brow Lamination must always be performed before waxing, threading or plucking treatments. IF performing this service after to tidy brows - You must completely avoid getting ANY solution on the area to be waxed.
• Do not apply scrubs to the eyebrow area before lamination.
• Never use the same brush to apply Step 1 and Step 2. You must use two disposable brushes for both steps.
• In case of contact with eyes, wash immediately with distilled water.

HOW BROW LAMINATION WORKS:

Step 1 
When the Brow Perming Solution is applied, the chemical process breaks down the bonds within each hair, allowing them to morph and move into a new shape. 

Step 2 
When the Brow Fixing Solution is applied, the hair bond remodels into the new shape. 

Step 3 
The Brow Keratin is applied at the end of the treatment to restore moisture back into the brows and skin. 

NOTE: The new brow design and shape takes up to 48 hours for the bonds to lock into place and cure, which is why it is important to emphasise that the client follows the correct aftercare for 48 hours post-treatment.


BROW LAMINATION CLIENT AFTERCARE:

What should and should not be done 24 hours post treatment for longevity of results:

• Keep brows dry for 24 hours.
• Use Brow Code Gold Brow Growth Oil daily.
• Do not apply make-up or undertake further eye treatments for at least 24 hours after your treatment.
• Avoid swimming/sauna/working out for 24-48 hours. Any excess moisture after this time can cause a slight curl/frizz to the brow hair.
• Do not allow prolonged exposure to direct sunlight or heat.
• Do not apply Retin-A, AHA or exfoliate around the brow area for 72 hours either side of the treatment.
• No self-tanning products should be used on the face for one week prior and 48 hours after treatment.

NOTE: If any stinging or swelling occurs, apply a cold compress to soothe and seek medical advice. Be sure to let the technician know of any adverse reactions. 

• Vegan Friendly Formula! We use a Vegan friendly Keratin solution to ensure we adhere to strict Vegan guidelines
• Services per Lustre Kit: approx 15-18 
• We recommend purchasing Brow Gold along with this Lamination kit in order to provide the full recommended experience for customers, as well as the recommended after-care retail product.

WHAT IS INCLUDED:

1. Brow Code’s Lustre Brow Adhesive  (a water-soluble brow adhesive used to fix the hairs in place prior to Lustre Brow Lamination).

2. Lustre Lamination Kit 

3. Brow Wrap

BROW CODE LUSTRE LAMINATION STEPS:

Read all Instructions & Important Information below before starting treatment.

Prior to Step 1 in our Lustre Lamination Kit, apply Brow Code’s Lustre Brow Adhesive evenly throughout the brow in a thin layer. Use a disposable spoolie brush to comb and fix the hairs in place in an upward direction. Ensure you are setting the brow in the exact direction you wish to laminate the hairs in. Once dry, you can apply Step 1 on top of this and continue all directions as seen on The Lustre Kit.

Apply the Brow Adhesive as per above steps and follow below:

1. Apply Brow Code Lustre Step 1 - Brow Perming Solution to one brow at a time. Take care to keep solution to the hair area only. Cover brows with cling wrap to ensure the hairs are fixed in an upright position. Leave for 5-8 minutes but no longer than 9 minutes.

2. Remove the cling wrap and remove Step 1 with a dry cotton tip. If any excess product remains, use a damp cotton tip to remove from the tips of the hairs. Apply Step 2 - Brow Fixing Solution to both brows. Cover again using your cling wrap to fix the hairs into place. Leave on for 5-8 minutes but no longer than 9 minutes.

3. Remove the cling wrap and remove Step 2 with a dry cotton tip. If any excess product remains, use a damp cotton tip to remove from the tips of the hairs. Apply Brow Code tint (or colour deposit) using the Brow Code 122 brush for application of colour.
​
4. After completing the tinting service, apply Step 3 - Brow Keratin Nourish to both brows. Use a generous amount to ensure this is applied to the hair and the skin. Instruct the client to remove after 2 hours with a dry cotton tip or pad.
​
5. Retail the Brow Gold Oil to your client and instruction them to nourish their skin and hair daily. 
 

Step 1: 5-8 minutes. No longer than 9 minutes.
Step 2: 5-8 minutes.
Step 3: Client to remove after 2 hours and apply Brow Gold.


HAIR TYPE GUIDE:
Thin or Fine Brow Hairs: 4 - 5  Minutes 
Medium or Normal Brow Hairs: 5 - 7  Minutes
Coarse of Stubborn Hairs: 7 - 10  Minutes

IMPORTANT:

• Tint and other colour deposit techniques develop much faster after lamination due to porous hair. We therefore advise to reduce your timings and watch the development of the colour closely.
• Brow Lamination must always be performed before waxing, threading or plucking treatments. IF performing this service after to tidy brows - You must completely avoid getting ANY solution on the area to be waxed.
• Do not apply scrubs to the eyebrow area before lamination.
• Never use the same brush to apply Step 1 and Step 2. You must use two disposable brushes for both steps.
• In case of contact with eyes, wash immediately with distilled water.

HOW BROW LAMINATION WORKS:

Step 1 
When the Brow Perming Solution is applied, the chemical process breaks down the bonds within each hair, allowing them to morph and move into a new shape. 

Step 2 
When the Brow Fixing Solution is applied, the hair bond remodels into the new shape. 

Step 3 
The Brow Keratin is applied at the end of the treatment to restore moisture back into the brows and skin. 

NOTE: The new brow design and shape takes up to 48 hours for the bonds to lock into place and cure, which is why it is important to emphasise that the client follows the correct aftercare for 48 hours post-treatment.


BROW LAMINATION CLIENT AFTERCARE:

What should and should not be done 24 hours post treatment for longevity of results:

• Keep brows dry for 24 hours.
• Use Brow Code Gold Brow Growth Oil daily.
• Do not apply make-up or undertake further eye treatments for at least 24 hours after your treatment.
• Avoid swimming/sauna/working out for 24-48 hours. Any excess moisture after this time can cause a slight curl/frizz to the brow hair.
• Do not allow prolonged exposure to direct sunlight or heat.
• Do not apply Retin-A, AHA or exfoliate around the brow area for 72 hours either side of the treatment.
• No self-tanning products should be used on the face for one week prior and 48 hours after treatment.

NOTE: If any stinging or swelling occurs, apply a cold compress to soothe and seek medical advice. Be sure to let the technician know of any adverse reactions. 

• Vegan Friendly Formula! We use a Vegan friendly Keratin solution to ensure we adhere to strict Vegan guidelines
• Services per Lustre Kit: approx 15-18 
• We recommend purchasing Brow Gold along with this Lamination kit in order to provide the full recommended experience for customers, as well as the recommended after-care retail product.

WHAT IS INCLUDED:

1. Brow Code’s Lustre Brow Adhesive  (a water-soluble brow adhesive used to fix the hairs in place prior to Lustre Brow Lamination).

2. Lustre Lamination Kit 

3. Brow Wrap

BROW CODE LUSTRE LAMINATION STEPS:

Read all Instructions & Important Information below before starting treatment.

Prior to Step 1 in our Lustre Lamination Kit, apply Brow Code’s Lustre Brow Adhesive evenly throughout the brow in a thin layer. Use a disposable spoolie brush to comb and fix the hairs in place in an upward direction. Ensure you are setting the brow in the exact direction you wish to laminate the hairs in. Once dry, you can apply Step 1 on top of this and continue all directions as seen on The Lustre Kit.

Apply the Brow Adhesive as per above steps and follow below:

1. Apply Brow Code Lustre Step 1 - Brow Perming Solution to one brow at a time. Take care to keep solution to the hair area only. Cover brows with cling wrap to ensure the hairs are fixed in an upright position. Leave for 5-8 minutes but no longer than 9 minutes.

2. Remove the cling wrap and remove Step 1 with a dry cotton tip. If any excess product remains, use a damp cotton tip to remove from the tips of the hairs. Apply Step 2 - Brow Fixing Solution to both brows. Cover again using your cling wrap to fix the hairs into place. Leave on for 5-8 minutes but no longer than 9 minutes.

3. Remove the cling wrap and remove Step 2 with a dry cotton tip. If any excess product remains, use a damp cotton tip to remove from the tips of the hairs. Apply Brow Code tint (or colour deposit) using the Brow Code 122 brush for application of colour.
​
4. After completing the tinting service, apply Step 3 - Brow Keratin Nourish to both brows. Use a generous amount to ensure this is applied to the hair and the skin. Instruct the client to remove after 2 hours with a dry cotton tip or pad.
​
5. Retail the Brow Gold Oil to your client and instruction them to nourish their skin and hair daily. 
 

Step 1: 5-8 minutes. No longer than 9 minutes.
Step 2: 5-8 minutes.
Step 3: Client to remove after 2 hours and apply Brow Gold.


HAIR TYPE GUIDE:
Thin or Fine Brow Hairs: 4 - 5  Minutes 
Medium or Normal Brow Hairs: 5 - 7  Minutes
Coarse of Stubborn Hairs: 7 - 10  Minutes

IMPORTANT:

• Tint and other colour deposit techniques develop much faster after lamination due to porous hair. We therefore advise to reduce your timings and watch the development of the colour closely.
• Brow Lamination must always be performed before waxing, threading or plucking treatments. IF performing this service after to tidy brows - You must completely avoid getting ANY solution on the area to be waxed.
• Do not apply scrubs to the eyebrow area before lamination.
• Never use the same brush to apply Step 1 and Step 2. You must use two disposable brushes for both steps.
• In case of contact with eyes, wash immediately with distilled water.

HOW BROW LAMINATION WORKS:

Step 1 
When the Brow Perming Solution is applied, the chemical process breaks down the bonds within each hair, allowing them to morph and move into a new shape. 

Step 2 
When the Brow Fixing Solution is applied, the hair bond remodels into the new shape. 

Step 3 
The Brow Keratin is applied at the end of the treatment to restore moisture back into the brows and skin. 

NOTE: The new brow design and shape takes up to 48 hours for the bonds to lock into place and cure, which is why it is important to emphasise that the client follows the correct aftercare for 48 hours post-treatment.


BROW LAMINATION CLIENT AFTERCARE:

What should and should not be done 24 hours post treatment for longevity of results:

• Keep brows dry for 24 hours.
• Use Brow Code Gold Brow Growth Oil daily.
• Do not apply make-up or undertake further eye treatments for at least 24 hours after your treatment.
• Avoid swimming/sauna/working out for 24-48 hours. Any excess moisture after this time can cause a slight curl/frizz to the brow hair.
• Do not allow prolonged exposure to direct sunlight or heat.
• Do not apply Retin-A, AHA or exfoliate around the brow area for 72 hours either side of the treatment.
• No self-tanning products should be used on the face for one week prior and 48 hours after treatment.

NOTE: If any stinging or swelling occurs, apply a cold compress to soothe and seek medical advice. Be sure to let the technician know of any adverse reactions. 

• Vegan Friendly Formula! We use a Vegan friendly Keratin solution to ensure we adhere to strict Vegan guidelines
• Services per Lustre Kit: approx 15-18 
• We recommend purchasing Brow Gold along with this Lamination kit in order to provide the full recommended experience for customers, as well as the recommended after-care retail product.

WHAT IS INCLUDED:

1. Brow Code’s Lustre Brow Adhesive  (a water-soluble brow adhesive used to fix the hairs in place prior to Lustre Brow Lamination).

2. Lustre Lamination Kit 

3. Brow Wrap

BROW CODE LUSTRE LAMINATION STEPS:

Read all Instructions & Important Information below before starting treatment.

Prior to Step 1 in our Lustre Lamination Kit, apply Brow Code’s Lustre Brow Adhesive evenly throughout the brow in a thin layer. Use a disposable spoolie brush to comb and fix the hairs in place in an upward direction. Ensure you are setting the brow in the exact direction you wish to laminate the hairs in. Once dry, you can apply Step 1 on top of this and continue all directions as seen on The Lustre Kit.

Apply the Brow Adhesive as per above steps and follow below:

1. Apply Brow Code Lustre Step 1 - Brow Perming Solution to one brow at a time. Take care to keep solution to the hair area only. Cover brows with cling wrap to ensure the hairs are fixed in an upright position. Leave for 5-8 minutes but no longer than 9 minutes.

2. Remove the cling wrap and remove Step 1 with a dry cotton tip. If any excess product remains, use a damp cotton tip to remove from the tips of the hairs. Apply Step 2 - Brow Fixing Solution to both brows. Cover again using your cling wrap to fix the hairs into place. Leave on for 5-8 minutes but no longer than 9 minutes.

3. Remove the cling wrap and remove Step 2 with a dry cotton tip. If any excess product remains, use a damp cotton tip to remove from the tips of the hairs. Apply Brow Code tint (or colour deposit) using the Brow Code 122 brush for application of colour.
​
4. After completing the tinting service, apply Step 3 - Brow Keratin Nourish to both brows. Use a generous amount to ensure this is applied to the hair and the skin. Instruct the client to remove after 2 hours with a dry cotton tip or pad.
​
5. Retail the Brow Gold Oil to your client and instruction them to nourish their skin and hair daily. 
 

Step 1: 5-8 minutes. No longer than 9 minutes.
Step 2: 5-8 minutes.
Step 3: Client to remove after 2 hours and apply Brow Gold.


HAIR TYPE GUIDE:
Thin or Fine Brow Hairs: 4 - 5  Minutes 
Medium or Normal Brow Hairs: 5 - 7  Minutes
Coarse of Stubborn Hairs: 7 - 10  Minutes

IMPORTANT:

• Tint and other colour deposit techniques develop much faster after lamination due to porous hair. We therefore advise to reduce your timings and watch the development of the colour closely.
• Brow Lamination must always be performed before waxing, threading or plucking treatments. IF performing this service after to tidy brows - You must completely avoid getting ANY solution on the area to be waxed.
• Do not apply scrubs to the eyebrow area before lamination.
• Never use the same brush to apply Step 1 and Step 2. You must use two disposable brushes for both steps.
• In case of contact with eyes, wash immediately with distilled water.

HOW BROW LAMINATION WORKS:

Step 1 
When the Brow Perming Solution is applied, the chemical process breaks down the bonds within each hair, allowing them to morph and move into a new shape. 

Step 2 
When the Brow Fixing Solution is applied, the hair bond remodels into the new shape. 

Step 3 
The Brow Keratin is applied at the end of the treatment to restore moisture back into the brows and skin. 

NOTE: The new brow design and shape takes up to 48 hours for the bonds to lock into place and cure, which is why it is important to emphasise that the client follows the correct aftercare for 48 hours post-treatment.


BROW LAMINATION CLIENT AFTERCARE:

What should and should not be done 24 hours post treatment for longevity of results:

• Keep brows dry for 24 hours.
• Use Brow Code Gold Brow Growth Oil daily.
• Do not apply make-up or undertake further eye treatments for at least 24 hours after your treatment.
• Avoid swimming/sauna/working out for 24-48 hours. Any excess moisture after this time can cause a slight curl/frizz to the brow hair.
• Do not allow prolonged exposure to direct sunlight or heat.
• Do not apply Retin-A, AHA or exfoliate around the brow area for 72 hours either side of the treatment.
• No self-tanning products should be used on the face for one week prior and 48 hours after treatment.

NOTE: If any stinging or swelling occurs, apply a cold compress to soothe and seek medical advice. Be sure to let the technician know of any adverse reactions. 

Brow Code’s Lustre Brow Adhesive is a water-soluble brow adhesive used to fix the hairs in place prior to Lustre Brow Lamination. 
 

Directions: Prior to Step 1 in our Lustre Lamination Kit, apply Brow Code’s Lustre Brow Adhesive evenly throughout the brow in a thin layer. Use a disposable spoolie brush to comb and fix the hairs in place in an upward direction. Ensure you are setting the brow in the exact direction you wish to laminate the hairs in. Once dry, you can apply Step 1 on top of this and continue all directions as seen on The Lustre Kit.

42mm x 200m

No more cutting plastic wrap to size for Brow Lamination! The Brow Code Lamination Wrap is sized perfectly and eliminates waste. The box is designed with a sharp edge to aid in tearing away each section of wrap.

The Brow Code scissor range has been custom-made and designed for you to style your brow just like the professionals do. The curved scissor is designed for trimming unruly hairs to create a soft natural finish.

Do not soak in sterilising solution. Sterilise after use, dry carefully with cloth and leave to air dry

• Natural Ingredients
• Made in Italy

Introducing Brow Code’s premium range of hot wax specifically designed for defining brows. Sculpting and styling brows has just been taken to another level!

The Brow Code advanced styling wax is formulated to easily mould and create the shape of brow whilst removing every single hair.

This NEW premium microwavable hot wax has a rich metallic gold colour, enriched with our signature Japanese Cherry Blossom scent for the ultimate Brow Code styling experience.

This new, smaller / mess free alternative to our large 1000g Brow Code Hot Wax beads is formulated using natural ingredients in comparison to the beaded synthetic product.

Proudly Cruelty Free. Made in Italy.

HOW TO USE:

1. Heat the wax in the microwave until it is completely melted and a smooth cream consistency. As a guide, heat a full tub for MAX 80 seconds or half tub for MAX 60 seconds. This will vary on microwave wattage. Leave to stand in the microwave for 2 minutes.

NOTE: TAKE EXTREME CAUTION NOT TO OVERHEAT. NEVER LEAVE THE HEATING WAX UNATTENDED. NEVER HEAT FOR MORE THAN 80 SECONDS. FOLLOW THE ENCLOSED INSTRUCTIONS EXACTLY TO AVOID ANY RISK OF BURNING.

2. Apply Brow Code Micellar Water to clean and prepare the area prior to waxing.
3. Check temperature of the wax before use with a patch test on the inside of the wrist.
4. Mix wax with a wooden spatula to ensure correct creamy consistency.
5. Use the edge of the spatula to apply a thin, even layer working in the hair growth direction. Leave a thicker edge along the strip of the wax applied.
6. Allow wax to cool (approx 20 seconds). 
7. Raise the edge of the strip of wax slightly and then remove wax quickly in the opposite direction of hair growth. 

NOTE: DO NOT LEAVE WAX ON THE SKIN FOR MORE THAN ONE MINUTE.
 

Available in 5 shades. 5gm

Available in 5 shades. 5gm

Available in 5 shades. 5gm

Available in 5 shades. 5gm

Available in 5 shades. 5gm

Brow Code’s Imitations pencil features a micro tip specifically designed to mimic a natural, detailed hair-like stroke.

Apply to brows directly to precisely fill in, define and add colour best by stroking in an upward direction from the bottom of the brow.

Use the spoolie end before and/or after to comb through your brows for a finished look.

The formula is water and sweat resistant.

Shades Available:

Light Ash Blonde
Taupe
Warm Medium Brown
Brunette
Deep Dark Brunette

Imitations Pencil RRP $38 AUD

Brow Code’s Imitations pencil features a micro tip specifically designed to mimic a natural, detailed hair-like stroke.

Apply to brows directly to precisely fill in, define and add colour best by stroking in an upward direction from the bottom of the brow.

Use the spoolie end before and/or after to comb through your brows for a finished look.

The formula is water and sweat resistant.

Shades Available:

Light Ash Blonde
Taupe
Warm Medium Brown
Brunette
Deep Dark Brunette

Imitations Pencil RRP $38 AUD

Brow Code’s Imitations pencil features a micro tip specifically designed to mimic a natural, detailed hair-like stroke.

Apply to brows directly to precisely fill in, define and add colour best by stroking in an upward direction from the bottom of the brow.

Use the spoolie end before and/or after to comb through your brows for a finished look.

The formula is water and sweat resistant.

Shades Available:

Light Ash Blonde
Taupe
Warm Medium Brown
Brunette
Deep Dark Brunette

Imitations Pencil RRP $38 AUD